The device is used to measure the moisture content of wood and building materials – on condition they are not conductive materials! The measurement is invasive by two needles with use of resistivity method. Equipped with 3.5 mm jack for connecting a wide range of measurement accessories (SP1, PP2, BE3, PE4, PE5, CK6, VK7). Measuring needles are easy replaceable.
Additional accessories:
SP1 – extra pair of needles
PP2 – outer needle probe with cable 70cm
PE3 – circular pair of depth probes 23cm
FE4 – flat pair of depth probes 23cm
BE5 – brush pair of depth probes 13cm
CK6 – calibration check set
VK7 – additional cable for PE3, FE4, BE5
The measurement is carried out with two needles by means of the resistive method. Equipped with a 3½mm connector.
| Technically | |
| display | monochrome, with 128×64 pixel resolution and backlight |
| Operating temperature range | from 5 ° C to 40 ° C |
| Average working time | up to 20 hours (new batteries) |
| power supply | 2xAA batteries |
| packaging | Plastic suitcase |
| mass | 220g |
| Dimensions (L x W x H) | 132mm x 79mm x 24mm |
